extender.linksys.com

Linksys Extender Setup

Extender.linksys.com setup website can be used for multiple purposes such as the default setup page for Linksys Extender Setup. It provides full control on Linksys extender.

The technological era we are living in requires a good and seamless internet connection on every spot of our home. Every single device we use today needs an active internet connection. 

A single router can provide a wireless internet connection to half of your home but for that, your router needs to be really strong. 

When your single router cannot reach your entire home need for extenders arises. Extenders can reach the rest of your home and provide a seamless internet connection for your devices.

Extender.linksys.com or Linksys Extender Setup is compatible with a large number of devices. It can provide a seamless WIFI connection to almost everything you may have in your home. 

Some compatible devices are Smartphones, Computers, Ring doorbells, Amazon Alexa, Smart Televisions, WIFI Cameras, and many more.

Overview of Linksys Extender

Linksys has some wide varieties of extenders in their vault to fulfill various sorts of exigencies consumers may have. Setting your range extender is extremely easy and simple.

You would just need to get online and get it connected to your existing wireless router. No matter what trouble you may have with your network throughout your home, Linksys has a wide variety of extenders available. You can choose an extender to fit your need.

Most of the Linksys extenders has beamforming technology that makes sure that your extender would focuses WIFI signals towards the device rather than spreading it in all directions.

Use your Linksys extender as an Access Point and extend wireless through your home using old and reliable wired connection.

Use spot finder technology to help you choose an ideal location for the extender.

Wireless Mesh technology makes sure Seamless WIFI roaming around your home. 

Linksys Extender Setup with extender.linksys.com

Extender setup can be done through a smartphone, computer, or any other device that has WiFi capability. Just to make things easier we would suggest you to use a computer for the initial setup.

If you can’t seem to arrange a computer for the initial setup you can either use a tablet or a smartphone. Either of these devices can be used for the initial setup.

This method is perfect for the people who do not want to use WPS method or do not have WPS button on their existing router. If used perfectly as discussed in the instructions below it will be an easy way for the Linksys Extender Setup.

Before you begin with the web browser setup there are some requirements for the extender. Let’s discuss things you would need to make sure you have handy:

  • Make sure your router has an active internet connection.
  • Your existing router’s SSID and Password.
  • Your router’s IP address.
  • The device you will be doing the initial setup on should be updated to the latest version.
  • The computer does not have an active internet connection, it will also sabotage the chances for a successful initial setup.
  • Make sure your router and extender are in the same room for the initial setup.

Extender setup with a computer:

As discussed earlier a computer is the recommended device for the extender.linksys.com or Linksys Extender Setup. Follow the steps discussed below for the initial setup of your extender:

extender.linksys.com
  • Plug your router and extender to the power.
  • Your extender should be in the same room for the initial setup and after the successful setup, you can unplug it and move it to your desired location. 
  • Make sure your router and extender are turned on and the router has an active internet connection. It might take a minute or so please be patient.
  • Open a web browser on the computer (Google Chrome, Microsoft Edge, Mozilla Firefox, or Safari are among the recommended browsers)
  • Type http //extender.linksys.com or 192.168.1.1 for the setup page to open.
  •  When you first land on the setup page you will find the Start Setup option, click on that.
  •  Now the setup screen will ask you to create a log-in password. This password would be used to login to your extender settings page.
  • On the next screen click on how would you like to use your extender. Choose WiFi Extender if you would like to use it wirelessly or choose Access Point if you would like to use it as a wired range extender.
  • The next screen will show you all the available WiFi networks around you, choose your wireless network and click next.
  •  Type in your wireless password and click next.
  •  The next screen will allow you to change your extended wireless network and password.
  • The spot finder will let you know if your extender is in the right location or if you would like to move it further away or closer to your router.

Congratulations now your extender is connected to your existing router and has an active internet connection. Make sure to check the internet connection using any portable device.

Extender.linksys.com setup with a smartphone or a tablet:

Sometimes users may not have a computer for the initial setup process. Do not worry you still connect your extender with your existing router.

Follow the instructions below for the http ://extender.linksys.com setup process:

  • The first step is to plug in your extender to the power and wait for the power light to turn on.
  • Extender needs to be plugged in near your main wireless router.
  • Make sure your extender has an active internet connection.
  • Open a web browser on the smartphone or tablet (Google Chrome or Safari are among the recommended browsers)
  • Type http //extender.linksys.com or 192.168.1.1 for the setup page to open.
  • The setup screen will appear on your browser and click on Start Setup
  • Create a login password. 
  • Choose the operation mode. WIFI range extender for wireless use and Access Point for wired use.
  • On the next screen choose your main WIFI network and click next
  • Type your wireless password on the screen and click next
  • Now choose if you would like to change the extended WIFI name or password, leave it as it is if you do not want to make any changes in these settings.
  • On the next screen, a spot finder will help you choose the best location for your range extender.

Congratulations now your extender is ready to use. In case if these steps did not work for you try the WPS method.

Linksys Extender Setup with WPS or WIFI Protected Setup

For some users, the extender.linksys.com setup process might not work, and if you’re one of them you can try the WPS or WIFI Protected Setup process. 

Follow the instructions below for Linksys Extender Setup with WPS:

  • Plug your range extender to the power.
  • Wait for the power LED to start blinking Amber.
  • Push the WPS button on your router.
  • Within 2 minutes push the WPS button on your extender as well.
  • LED will start blinking green.
  • Within 2 minutes the light should turn solid green.
  • Move your extender to a place where you would like to use it at.
  • Check the LED light if turns solid green it indicates good connection.
  • Connect your devices to your extended WIFI and now your extender should give you internet connection.

Your range extender is now working and you should be able to get good internet connection on it. In case if your range extender starts blinking Amber again after WPS step, please repeat this step one more time.
extender.linksys.com

How to Factory Reset Linksys Extender?

Sometimes Linksys extender doesn’t work simply due to an interference in the previous connection or some changes in the main WIFI network. 

When we change even a single bit in our WIFI settings the extender will disconnect from our main WIFI and needs to be reconnected to the WIFI.

In these situations, you would like to reset your extender to the factory defaults so that you could go through the setup process once again and connect this extender to the main WIFI.

Situations where you would want to reset your Linksys extender:

  • Any change in SSID will cause your extender to disconnect.
  • Change in WIFI passwords will disconnect your extender from your router.
  • extender.linksys.com is not working.
  • After getting a new modem or router.
  • Sometimes power outages cause your extender to lose connection to the router.

Follow the instructions below to perform a Factory Reset on the extender:

extender.linksys.com
  • Plug your extender to the power and for the LED to start blinking Amber.
  • Grab a paper clip or any sharp object that you can put in the reset hole.
  • Push the reset button for 8 to 10 seconds.
  • The light will start blinking green and the extender will restart.
  • Now your extender is reset and ready to reconnect to the router

Reset through extender.linksys.com

  • Open a web browser and type your extender’s IP address.
  • Now login to your extender using your administrator password.
  • Click on administration and then select factory defaults.
  • Now click on the Restore Factory Defaults button.
  • In order to complete the reset process unplug the extender for 30 seconds and plug it back in.
Once the reset process is done you can go through the setup process again to reconnect your extender to the router. In case if you can’t reset it to the factory settings, unplug your extender from the power and wait for 30 seconds then go through the reset process one more time.

How to setup Linksys Extender as an Access Point?

Most of the Linksys extender can be used as an Access Point. Access Point is the extender mode that gets an internet connection from the main router through an ethernet cable.

If you use your extender as an Access Point you’ll get a reliable connection with a low latency rate and on top of that, you can use more devices with a stable connection as well.

Before starting up with the setup process you would need to make sure that:

  • You have an active internet connection
  • A long ethernet cable that can easily reach your extender and the router.
  • Your WIFI SSID and Password for the setup process.
When you have all of these things you can start with the setup process and follow the instructions below:
  • Plug your extender to the power and wait for the LED light to start blinking Amber.
  • Connect an ethernet cable from your router to the extender.
  • Open a web browser on a computer or smartphone.
  • Type http://extender.linksys.com or 192.168.1.1 
  • Now click on start setup
  • Choose wired range extender as the operation mode of your extender and click next.
  • The next screen will ask you to put your name and password on your extended WIFI.
  • Once done with SSID and Password click next.
  • Create an admin password and a hint in order to remember it.
  • If prompted, register the extender and click next.
  • Now your extender is set up as an access point mode.
  • Check if your extended network has an internet connection by connecting a device to it.
linksys extender setup

FAQ

How to reset linksys extender?

Push the reset button for 10 seconds with a paper clip while your extender is plugged into an electrical outlet.

How to update firmware on linksys extender?

Type the IP address of your extender on the web browser. Log in to the page with your administrator password and then click on the firmware update.

How do i change SSID or password?

Open your extender’s settings page using its IP address and now click on wireless settings to change any settings you want to.

can i use 2 extender with one router?

Yes, you can use any number of extenders with your existing WIFI router.

Can I daisy chain Linksys extenders?

Yes, you can, Linksys extenders are ideal for creating a daisy chain. Just make sure your first extender is within the range of your existing router.

Can't find linksys extender setup?

If you’re not able to find Linksys Extender Setup on your device it is because your extender is not reset to its factory defaults. Please do a factory reset on your extender once.